The 4M0616005 air suspension compressor pump is an OEM-spec replacement part designed for the 2015 and later Audi Q7 (4M chassis), manufactured by Wabco. It supplies compressed air to the four-wheel air suspension system, enabling ride height adjustment and load compensation, and works with the drive mode system to ensure comfort and stability.
This is a brand new single pump, suitable for repair scenarios where the pump body has failed while the dryer remains in good condition. It resolves issues such as suspension sagging and abnormal ride height caused by compressor aging.
| Parameter | Specification |
|---|---|
| Product Name | Air Suspension Compressor Pump (Single Pump) |
| OE Number | 4M0616005 |
| Brand | Wabco |
| Vehicle Application | Audi Q7 4M (2015 onwards) |
| Chassis | 4M |
| Voltage | 12V |
| Type | Single pump (without dryer) |
| Included Components | Compressor pump body |
This product is compatible with the following Audi Q7 (4M) models:
⚠️ Important Note: This is a single pump and does NOT include the dryer. Although other models on the same platform (such as the Audi Q8, Bentley Bentayga, and Lamborghini Urus) use compressors with similar part numbers, specific compatibility must be confirmed against your original OE number. Please verify that your original compressor is indeed from the 4M0616005 series before purchase.
This product is a direct replacement for the following OEM part numbers:
Keep dry, clean and handle with care.
Land Rover air suspension compressor pump warehouse storage and handling
Think Global, Act Local. Proven Worldwide.
Global exhibitions showcasing Land Rover air suspension components
Q1: How do I know if my Audi Q7 4M needs a new compressor?
A: Common symptoms include: vehicle sagging after parking; inability to adjust ride height or slow raising/lowering; compressor not operating or abnormal noise; suspension fault warnings on the dashboard. It is recommended to use a diagnostic tool to read fault codes for confirmation. Note that some fault codes (such as C118D01) may point to the compressor's electronic module rather than the pump body itself — the electrical circuit should be checked first.
Q2: What is the difference between the single pump and the assembly? How should I choose?
A: The single pump includes only the pump body, suitable for cases where the dryer is in good condition and only the pump body has failed. The assembly includes the dryer, relay, and other components, suitable for scenarios where the system has aged comprehensively or the dryer is saturated. If your original compressor has been in use for more than 5 years, it is recommended to choose the assembly version to avoid secondary repairs in the short term.
Q3: What should I pay attention to when installing the 4M0616005 single pump?
A: First, confirm that your original compressor is from the 4M0616005 series; Second, check the condition of the dryer — if it has aged, it should be replaced at the same time; Third, it is recommended to replace the relay as well; Fourth, after installation, use a diagnostic tool to perform inflation/deflation tests and clear any fault codes. Professional installation by a technician with Audi service experience is recommended.
Contact Us at Any Time