The 4E0616007A air suspension compressor is an OEM-spec replacement part designed for the 2002–2010 Audi A8 (D3/4E chassis), specifically for diesel versions and 10- to 12-cylinder models, manufactured by Wabco. This compressor supplies compressed air to the four-wheel air suspension system, enabling ride height adjustment and load compensation. It is suitable for diesel engines and W12 petrol models, corresponding to Wabco part number 4154033090, and effectively resolves issues such as suspension sagging and abnormal ride height caused by compressor aging.
| Parameter | Specification |
|---|---|
| Product Name | Air Suspension Compressor |
| OE Number | 4E0616007A |
| Brand | Wabco |
| Vehicle Application | Audi A8 D3/4E (Diesel / 10–12 Cylinder) |
| Chassis | 4E |
| Voltage | 12V |
| Wabco Number | 4154033090 |
| Engine Compatibility | Diesel, W12 Petrol, V10 (S8) |
This product is compatible with the following Audi A8 (D3/4E) models:
⚠️ Important Note: This product is suitable for diesel versions and 10- to 12-cylinder models (corresponding to Wabco 4154033090). 6- to 8-cylinder petrol models such as the 4.2L V8 use a different compressor specification (4E0616007B), and the two are NOT interchangeable. Please verify your engine type and compressor model before purchase.
This product is a direct replacement for the following OEM part numbers:
Keep dry, clean and handle with care.
Land Rover air suspension compressor pump warehouse storage and handling
Think Global, Act Local. Proven Worldwide.
Global exhibitions showcasing Land Rover air suspension components
A: Common symptoms include: vehicle sagging at one side or all four corners after parking; inability to adjust ride height or slow raising/lowering; compressor running continuously or not operating at all, accompanied by abnormal noise; suspension fault warnings on the dashboard. It is recommended to use a diagnostic tool to read fault codes for confirmation and to check the air springs and lines for leaks.
A: No. This product is suitable for diesel versions and 10- to 12-cylinder models (Wabco 4154033090). 6- to 8-cylinder petrol models such as the 4.2L V8 use 4E0616007B (Wabco 4154033080), and the two are NOT interchangeable. Be sure to confirm your engine type and original compressor part number before purchase.
A: First, confirm that your vehicle is a diesel or 10- to 12-cylinder model with a matching compressor model; Second, it is recommended to replace the compressor relay at the same time to avoid premature failure of the new compressor; Third, after installation, use a diagnostic tool to perform inflation/deflation tests and clear any fault codes; Fourth, check the condition of the dryer — if it has aged, it is recommended to replace it at the same time. Professional installation by a technician with Audi service experience is recommended.
Contact Us at Any Time