The 4H0616005 air suspension compressor pump is an OEM-spec replacement part designed for the 2009–2018 Audi A8 (D4/4H chassis), manufactured by Wabco. This compressor supplies compressed air to the four-wheel air suspension system, enabling ride height adjustment and load compensation. As a brand new single pump, it is compatible with most engine configurations on the D4 platform and effectively resolves issues such as suspension sagging and abnormal ride height caused by compressor aging.
| Product Name | Air Suspension Compressor Pump (Single Pump) |
|---|---|
| OE Number | 4H0616005 |
| Brand | Wabco |
| Vehicle Application | Audi A8 D4/4H (2009–2018) |
| Chassis | 4H |
| Voltage | 12V |
| Type | Single pump |
| Included Components | Compressor pump body |
This product is compatible with the following Audi A8 (D4/4H) models:
⚠️ Important Note: The Audi D4 platform compressor is available under multiple OE numbers (4H0616005A/B/C/D, etc.). This product is a single pump from the 4H0616005 series. Before purchase, please verify your original compressor OE number and installation position — some configurations may require a matching dryer or relay.
This product is a direct replacement for the following OEM part numbers:
Keep dry, clean and handle with care.
Land Rover air suspension compressor pump warehouse storage and handling
Think Global, Act Local. Proven Worldwide.
Global exhibitions showcasing Land Rover air suspension components
A: Common symptoms include: vehicle sagging after parking; inability to adjust ride height or slow raising/lowering; compressor running continuously or not operating at all, accompanied by abnormal noise; suspension fault warnings on the dashboard. It is recommended to use a diagnostic tool to read fault codes for confirmation and to check the air springs and lines for leaks.
A: The single pump includes only the pump body, suitable for cases where the dryer is in good condition and only the pump body has failed. The assembly includes the dryer, relay, and other accessories, suitable for scenarios where the system has aged comprehensively. If your original compressor has been in use for more than 5 years, it is recommended to choose the assembly version to avoid secondary repairs in the short term.
A: First, verify your original compressor OE number to confirm compatibility with this product; Second, check the condition of the dryer — if it has aged, it is recommended to replace it at the same time; Third, it is recommended to replace the compressor relay as well; Fourth, after installation, use a diagnostic tool to perform inflation/deflation tests and clear any fault codes. Professional installation by a technician with Audi service experience is recommended.
Contact Us at Any Time