The 4M0616013A air suspension valve block unit is an OEM-spec replacement part designed for the 2016 and later Audi Q7 (4M chassis) and platform-sharing models such as the Q8 and Volkswagen Touareg. As the central hub of the air suspension system, it distributes high-pressure air from the compressor precisely to the four air springs, enabling ride height adjustment and attitude control. This brand new replacement unit effectively resolves issues such as suspension sagging, inability to adjust ride height, and system fault warnings caused by internal solenoid valve sticking or seal aging.
| Parameter | Specification |
|---|---|
| Product Name | Air Suspension Valve Block Unit |
| OE Number | 4M0616013A |
| Vehicle Application | Audi Q7 4M (2016 onwards) |
| Type | Solenoid Valve Block / Distributor Valve |
| Material | High-strength plastic |
| Included Components | Valve body assembly, solenoid valve set, O-ring seals |
This product is compatible with the following models:
⚠️ Important Note: This product is 4M0616013A; some later models may have been updated to 4M0616013B. The two look similar but internal parameters may differ. Before purchase, be sure to verify your original valve block OE number or confirm compatibility via VIN.
This product is a direct replacement for the following OEM part numbers:
Keep dry, clean and handle with care.
Air suspension valve block warehouse storage and handling
Think Global, Act Local. Proven Worldwide.
Global exhibitions and trade shows for automotive parts
A: Common symptoms include: vehicle sagging at one side or diagonally after parking; noticeably slower ride height adjustment; compressor starting frequently or running continuously; air suspension fault warnings on the dashboard. Note: Symptoms of a faulty valve block are similar to air spring leaks. It is recommended to use a diagnostic tool to read fault codes and check for hissing sounds at the valve block connections to accurately distinguish the fault source.
A: The two look extremely similar, but the internal solenoid valve coil resistance and communication protocol with the ECU may differ. 4M0616013A is primarily for 2016–2020 Q7 and similar models, while 4M0616013B may be used on later model years or specific configurations. Mixing based on appearance alone is not recommended. Before purchase, confirm compatibility via VIN or original part number. Some sources indicate the B version may serve as a later replacement for the A version, but actual vehicle matching should prevail.
A: First, confirm the original valve block model matches before installation; Second, all O-ring seals must be replaced (supplied with this unit) to avoid secondary leaks from aged seals; Third, after installation, a diagnostic tool must be used to perform suspension system inflation/deflation tests and clear fault codes; Fourth, check that all air line connections are in the correct order (color coding is usually provided for identification). Professional installation by a technician with Audi service experience is recommended.
Contact Us at Any Time